Shopping Cart

Menu

Microprocessor Flame Photometer (Na, K,)

$60,500.00 $147.00

Categories :
  • None
Share:

Microprocessor Flame Photometers

Microprocessor Flame Photometers 1600-G comes with Flame Failure detection and Auto Gas Cutoff Facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after a few seconds.

Microprocessor Flame Photometer 1600-G is used for the determination of Sodium, Potassium, Calcium, Lithium & Barium. They use the latest microcontroller technology and advanced engineering techniques to give enhanced accuracy and reproducibility. They have soft touch membrane keys for ease of operation. The solution is aspirated through an atomizer. Air, sample and the fuel are mixed in the mixing chamber, which is then sprayed as a very fine mistintothe flame. Radiations from the flame passes through specific narrow band interference filter and pass to the photo-detector. The results are displayed on the 128 x 64 Graphical LCD with Backlit. The standard model comes with 2 filters (Na, K). Additional filters Ca & Li are optional at extra cost.

In this model, Calibration can be done with up to 25 standards of user choice (5 point for each element) and non-linearity correction is provided through an automatic curve fitting software. Multiple Calibration Curvescan be stored in the memory. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of multiple standards once a calibration has been performed.

Salient Features:

Microprocessor Based with PrinterInterface

Auto GasCutoffFacility

Auto Flame FailureDetection

Five Measurements in SingleAspiration of the sample

Calibration Curve Programmability Using Maximum of 25 Standard

Data Processing Through Curve Fitting Techniques- Least Squares, Quadratic

Multiple Calibration Curves Saving Facility

Printer Attachment Facility

Measurement can be done in ppm as well as in meq

Setup Storage Facility (up to 10 setup files)

Sample Data StorageFacility

Direct Results in ppm andmeq.

Online Help key

Useful for both Medical & SoilTesting Applications

MODE

General

Serum (in meq/l)

Urine (in meq/l)

ppm

meq/l

RANGE

Na

:

0-100

Upto 250 meq/l, 1:100 dil.

K

:

0-100

Upto 250 meq/l, 1:100 dil.

Ca

:

0-100

Upto 250 meq/l, 1:100 dil.

Li

:

0-100

Add a Review

Your email address will not be published. Required fields are marked *